ESOFLOOR

PRESENTATION

Esofloor is a rupture joint, decorative splitting, metallic, ready to install, (Aluminum, Brass or Stainless steel 304L), without projection, for floors and walls.
Esofloor is adapted to the constraints of the U4P4 type; U4P4 +; U4P4S for a maximum height of 30 min. Esofloor is fitted with perforated bases, guaranteeing perfect integration of the product between the raw support and the finish, whether glued or sealed, in accordance with the requirements of DTU 26.2, 43.1, 52.1. His soft filling central 5mm in EPDM (HL = 3 to 30mm) or 5 or 10mm in Silicone sealant (HL = 15 to 148mm) is able to take up amplitudes of 20% in stretching or compression, E type packing for 5mm EPDM or MM type for 5 or 10mm Mastic / Foam. Contact us in the event of specific unspecified constraints.

Use

Range ESOFLOOR is mainly intended for floors coated with resin, tiles, parquet, stone, marble, paving, for buildings in the tertiary or industrial sectors, hospitals, airports, stations, shopping centers, etc. It can also be used for wall joints in glued tiling configuration.

WARNING 
When configuring outdoors (outside the seaside), high humidity is permanent, we will direct you to our 304L stainless steel range rather than aluminum. (Catalysis phenomenon occurs between the alkalis of the mortar or adhesive, the water and the aluminum causing corrosion or premature pitting of the product.)

Packaging

2.5 meter bars for free heights from 3 to 30mm with EPDM trim
Bars of 3 meters for free heights from 38 to 148mm with silicone sealant on PE foam.

en_GBEnglish (UK)