ESOFLAT TPK
PRESENTATION
TheEsoflat TPK 40 or 70×30 is a floor seal sealing system, waterproof and trafficable, allowing to treat expansion joints from 20 to 40mm (40 × 30 model) or 50 to 70mm (70 × 30 model) in width. The soft filling (heat-sealable and interchangeable) 40 × 30 or 70 × 30 allows the system to take amplitudes on 3 axes, of ± 20mm total for the 40 × 30 model and ± 30mm total in the 70 × 30 version, it is held in place by clamping .
Sealing of the system Esoflat TPK can be ensured by adding a bridging membrane Ref. ES500 x 2 mm elastomer (heat-sealable), place under it, as illustrated below.
Use
- Tertiary buildings such as overhead car parks for airports, train stations, shopping centers, hospitals, etc.
- Supported traffic (speed <20 km / h): light vehicles, vans, light handling equipment on tires (cleaning, transport of luggage, etc.).
- Caddies and baggage trolley on solid rubber wheels, Occasional 15T heavy goods vehicles.
Packaging
Aluminum profiles lower (Base): 2 meter bars
- pre-drilled in ø 9mm in steps of 240mm, starting at 40mm i.e. 2 × 9 holes for 2ml of complete flat profile
- extruded aluminum AGS 6060 T6
M8 screws for concrete support not supplied.
Aluminum profiles upper clamping (Clamping cover): Bars of 2 meters
- pre drilled in ø 9mm countersunk 16mm (M8) at 240mm pitch, starting at 40mm i.e. 2 × 9 holes for 2ml of complete flat profile.
- extruded aluminum AGS 6060 T6. Standard NF EN515.
TF M8x25 screws + nuts for screwing the cover / base, supplied.
Flashing anodized aluminum clamping for Sol / Mu modelsr (interior or exterior flashing): Bars of 3 meters
- pre drilled in ø 6 countersunk 10mm in steps of 250mm, starting at 125mm (11 holes / length)
- anodized aluminum 30 / 10th, alloy 1015
GF40x30 elastomer seal or GS70x30 (floor / floor or floor / wall) : Rolls of 24 ml (REMOVED MODELS)
- Composition: TPE of the heat-sealable SEBS elastomer type
- Density (ISO R1183): 1.18
- Standard colors: Black
- Shore A hardness (ISO 868): 60 ± 5
- Elongation at break (ISO 527): 300%
- Tensile strength (ISO 527): 3.5 Mpa
- Operating temperature: - 35 ° C to + 90 ° C
- Good resistance to abrasion, UV, Ozone, chemical attacks, hydrocarbons.